Washing Machine Error Codes
Water in, water out, and a drum that has to balance before it spins. Almost every washer code you will see is one of those three systems reporting a timeout.
Samsung
Samsung: washer codes
Samsung Washer Error Code 4E / 4C
Samsung 4E and 4C mean the washer is not filling in time. The inlet valve, mesh filter and pressure hose checks that fix it, in the order to do them.
Read the guide →Samsung Washer Error Code 5E / 5C
Samsung 5E and 5C mean the washer could not drain in time. Filter, drain hose, pump and pressure switch checks in the order that actually finds the cause.
Read the guide →Samsung Washer Error Code UE / Ub
Samsung UE and Ub appear when the load will not balance for the spin. How to tell a bedding problem from worn suspension, a loose drum or a faulty level sensor.
Read the guide →Samsung Washer Error Code dE / dC
Samsung dE and dC mean the door is not detected as shut and locked. The latch, striker and wiring checks, plus why the code sometimes appears mid-cycle.
Read the guide →Samsung Washer Error Code LE / LC
Samsung LE is a leak or water-level fault and LC is a water-level sensor fault. How to find the leak path, test the pressure chamber and stop a repeat flood.
Read the guide →LG
LG: washer codes
LG Washer Error Code OE
LG OE means the washer cannot drain within the allowed time. The filter, drain hose, pump and check-valve checks, with the part numbers that matter.
Read the guide →LG Washer Error Code IE
LG IE means no water or too little water reaching the drum. Inlet screens, hoses, valve solenoids and the pressure hose, in the order to test them.
Read the guide →LG Washer Error Code UE
LG UE stops the spin when the load will not balance. How to test the suspension rods, the drum bearings and the level sensor before paying for parts.
Read the guide →Whirlpool
Whirlpool: washer codes
How to use these guides
Start with the code on the display, read the short answer, then work down the check order. Every guide names the part each check points to, so you can decide whether to open the machine yourself or call someone — and ask for the right thing when you do.
If the machine shows no code at all, start from diagnosis by symptom instead. If you already know the part, repair or replace puts a number-free frame around the decision.